Clima Sensor D

Clima Sensor D1400

The CLIMA SENSOR D serves for the measurement of environmental data using traditional general purpose instruments.
The measured parameters are : (depending on model)

Wind speed
Brightness on 3 cardinal points (East, South, West)
Twilight
Precipitation (Yes / No)
Air temperature
Relative humidity

In addition, all units are equipped with :

An internal DCF77 receiver which takes the time signal of an atomic clock and integrates it into the data telegram
A build-in heater to perform condensation protection
Several 0 - 10 V analog output signals
RS 485/422 ASCII output telegram incl. DCF values & measurements
A mounting bracket for mounting on a Ø 35 - 50 mm tube
A fixed 10 m cable (16x 0,14mm²) for all signals and powering

4 instrument variants are available :

Order-Nr.	Wind	Temp. - Hum	Precip.	Brightness	Twilight	DCF77 receiver	Analog outputs	RS422/485
4.9100.00.061	x		x	x	x	x	x	x
4.9101.00.061			x	x	x	x	x	x
4.9110.00.061	x	x	x	x	x	x	x	x
4.9111.00.061		x	x	x	x	x	x	x

Characteristics :

Wind speed : Measuring range : 1...40 m/s Resolution : 0,1 m/s Accuracy : ±0,5 m/s or ±5% of measuring value
Temperature : Measuring range : -20...+60°C Resolution : 0,1 K Accuracy : ±0,5 K @ WS > 2,5 m/s
Relative humidity : Measuring range : 0...100% Resolution : 1% Accuracy : ±3% (10...90%)@WS > 2,5 m/s
Precipitation : Measuring range : Precipitation Yes / No Sensitivity : 0,25 mm/h Switch-off delay : approx. 2 minutes
Brightness : (East, South, West) Measuring range : 0...150.000 Lux Resolution : 100 Lux Accuracy : ±3%
Twilight : Measuring range : 0...250 Lux Resolution : 1 Lux Accuracy : ± 5%		Operation power : Voltage : 16...28 VDC or 16...24 VAC Consumption : max. 150 mA Heater : 600 mA
Serial output : Interface : RS485 / RS422 Protocol : ASCII Mode : Full / Halfduplex Baudrates : 1200...19200 bd Output parameter : Environmental data, housing temp., date, time, sensor status, checksum		DCF 77 receiver : Automatic reception Analog outputs set to "zero" during synchronisation Serial outputs values are unvalid during synchronization (desactivated feature on delivery)
Analog outputs : Signals : 4, 6, 7 or 8x 0 - 10 V (depending on version) Precip. output : 0V= no / 10V= yes		Housing : Mounting : on tube Ø 35...50 mm Dimensions : Ø 130 x 430/335/310/215 mm Weight : 1,5 kg (complete version) Connection : 10 m cable LiYcY 16x 0,14 mm²